Agronomy Specs
Compact, audit-ready tables for tractor class, hydraulic flow, working width and boundary conditions around fertigation, venlo greenhouse yards and recirculating aquaculture system pads.
Structured selection data
These tables replace vague capability claims with parameters agronomists and agricultural engineers can attach to an RFQ. Values are selection guidance ranges, not a warranty of every field outcome. Soils, slopes, operator training and maintenance intervals can move measured results outside the published bands, so every shortlist should list site constraints beside the numeric targets.
When irrigation is present, tractor and implement geometry must respect drip tape laterals, center pivot tracks and fertigation timing. Crushing a lateral during primary tillage is a capital failure even if engine power looks correct on paper. Around venlo greenhouse yards, compact tractor transport width and loader class matter more than peak brochure horsepower. On recirculating aquaculture system pads, utility lift class must cover biofilter media moves and feed logistics without relying on improvised forklifts.
Crop protection choices should state the coverage method. On large rectangular fields, boom sprayers usually deliver higher hectares-per-hour throughput and more mature rate control. Drones remain useful on fragmented or steep parcels where boom geometry cannot enter safely. NEW Holland Agronomy Specs require the RFQ to name the chosen path so spray drift control assumptions are auditable.
Known limits remain explicit: tables published after the 2024 plot season do not warranty outcomes on slopes above the instrumented range, in soils outside the logged texture classes, or when operator training and filter intervals drift from the 2021 hydraulic protocol. Coverage Area (ha), Flow Rate (m3/h) for adjacent irrigation, Engine Power (hp), Tank Capacity (L), Working Width (m) and Moisture Target (%) must all be listed with site constraints before a shortlist is treated as procurement-ready.
| Decision domain | Primary metric | Review range | Method note |
|---|---|---|---|
| Tractor class | Engine power | 25–400 hp | Dyno under rotary tiller / chisel plow load steps |
| PTO package | PTO horsepower | 540 / 1000 rpm | Verify against implement shaft demand |
| Hydraulic system | Pump flow | 35–160 L/min | Pressure test at remotes; fluid grade logged |
| Tillage / planting | Working width | 1.5–12 m | Headland turn and transport clearance check |
| Crop protection | Boom width / tank | 18–36 m / 2000–4500 L | Spray drift control nozzle kit required |
| Irrigation adjacency | Track / clearance | Pivot / drip tape safe path | Avoid crushing laterals; fertigation timing noted |
| Greenhouse yard | Compact tractor fit | Transport width < 2.5 m | Venlo greenhouse packhouse haulage duties |
| RAS site support | Utility lift class | Mid-duty loader | Biofilter media and feed logistics on pad |
Acceptance checklist
Request a tailored Agronomy Specs pack with tractor class, hydraulic flow and irrigation adjacency notes for your hectares.
Request Spec Pack